VW 8v/16v ABA ABF MLS decompression Head Gasket Spacer - 0.9mm + VW 8V 276 N/A a

Description

VW 8v/16v ABA ABF MLS decompression Head Gasket Spacer - 0.9mm
Special cylinder head gasket for turbo conversion
With this special Turbo multilayer metal cylinder head gasket
The compression reduction is already integrated in the seal.
(Ground and coated)
Will accept pistons up to 84.00mm overbored sized, can be used with smaller bores with no problem too.
Compression ratio NEW will depend on the engine used
Manufacturer: SPA TURBO
Engine Code: All 2 liters   Blocks of VW 8V and 16V (some small modifications may be necessary in some cases)
9A, 6A, ACE, 2E, ADY, ACX ABF, AGG, AKR, ABA, ABBOT, ADW, AAD, AAE, CAST OFF, 3A, SD.
Similar to OE numbers/Comparable numbers of manufacturers
VW: 048103383B
VW:
053103383
VW:
053103383A
VW:
053103383B
VW:
53103383
ELWIS ROYAL: 0056010
PAYEN : BT810
MEGA CAR: 101030383048B
CORTECO: 414604P
ELRING: 915.590
ELRING: 915.599
FEBI BILSTEIN: 15558
GLAZIER: 50151
GOETZE: 30-027257-20
REINZ: 61-28290-00
SPESSO: 21194/7620
SWAG: 32 91 5558
REINZ: 61-29305-00
Available in 0.5mm; 1.5mm; 2.0mm, 2.5mm and 3.4mm thickness
We're the  VW Turbo experts!
VW 8V 276 N/A application hydraulic tappets performance camshaft
Application: EA 827 engines Capacities 1781-1847-1984cc from 1986
8V Engines with hydraulic tappets
VW Golf, Corrado, Audi 80, 100, 5000, Quattro, Jetta, Passat, Scirocco, Sharon, Vento, Gol, Pointer, Saveiro.
Duration intake: 276 degrees
Duration exhaust: 276 degrees
Intake valve lift: 11.50mm
Exhaust valve lift: 11.50mm
lobe centers: 110 degrees
valve timing
Intake open: 27 degrees
Intake closes: 69 degrees
Exhaust open: 67 degrees
Exhaust close: 29 degrees
Valve clearance: hydraulic lifters
Base circle: 34mm
Made of 1045 quenched steel
Billet machined
52-58 HRC
IMPORTANT: this is a performance camshaft, not a OEM replacement, installation may require ECU work, cylinder head work, special lifters and springs, no instructions included, no other parts included.