Scotch Contractor Grade Masking Tape, 0.94 inches by 60.1 yards 360 yards total,

Description

Scotch Contractor Grade Masking Tape, 0.94 inches by 60.1 yards 360 yards total,
Product Description
Scotch Contractor Grade Masking Tape is a general purpose masking tape designed for use on non-damageable surfaces. Use on vinyl, carpet, metal, and plastic for the protection you need to get the job done. Scotch Contractor Grade Masking Tape holds to surfaces for up to 3 days and then removes easily without leaving any sticky residue behind.
From the Manufacturer
Scotch Masking Tape 2020-24EVP, .94 in x 60 yd (24 mm x 55 m). Scotch Masking Tapes are the professional's choice in projects where higher adhesion tapes are needed. The medium-high adhesion levels make them ideal for most coated, non-damageable surfaces. They provide durability and staying power, yet still offer the same clean removal you would expect from Scotch Brand Tapes. These tapes bond aggressively, yet have a smooth unwind.
Contractor Grade 2020
General Purpose 2050
Heavy Duty 2020+
Original 2090
Adhesion Level
Strong
Medium
Strong
Medium
Recommended Surfaces
Vinyl, Carpet, Metal, Plastic
Walls, Vinyl, Carpet, Metal, Plastic
Vinyl, Carpet, Metal, Plastic, Lacquer Coating
Walls, Glass, Tile, Trim, Baseboards
Removal Time
3 day interior/ 1 day exterior clean removal
5 day interior/ 1 day exterior clean removal
3 day interior and exterior clean removal
14 day interior and exterior clean removal
Color
Beige
Beige
Orange
Blue
Sizes Available
.70 in x 60.1 yd, .94 in x 60.1 yd, 1.41 in x 60.1 yd, 1.88 in x 60.1 yd
.70 in x 60.1 yd, .94 in x 60.1 yd, 1.88 in x 60.1 yd
.94 in x 60 yd, 1.41 in x 60 yd, 1.88 in x 60.1 yd
.70 in x 60 yd, .94 in x 60 yd, 1.41 in x 60 yd, 1.88 in x 60 yd, 2.83 in x 60 yd
Surface Prep & Tape Application
Clean Surface
The surface should be clean, dry and dust-free so the tape sticks properly.
Apply Tape
Lay tape onto the surface, pressing down as you go. Dont stretch the tape, or it may lift or break.
Secure Tape
Press tape down firmly with a smooth edge, like a putty knife or credit card.
Let Tape Set
Wait about 30 to 60 minutes before you begin painting.
Proper Tape Removal
Wait
Wait until the paint is dry to the touch before removing the tape. Check the paint can for the manufacturer's dry times.
Score
Use a putty knife or razor blade to score along the edge of the tape. This prevents paint from being pulled up with the tape and from cracking along the paint line.
Tape
Taking your time, lift up the painters tape and pull it back on itself, removing at a 45 degree angle. If adhesive sticks to the surface, try a 90-degree angle.
Clean Finish
Youll get a sharp, clean line and a professional looking paint job!