Polyblend PC0910S-6 Ceramic Tile Caulk, #9 Natural Gray, 10.5 Oz

Description

Our ceramic tile caulk is for caulking around sinks, tubs, showers and where tile meets tile or another surface. Also adheres bath fixtures and loose tile. Do not use to install grab bars. Maximum joint width and depth should not exceed 1/4" (6 mm). Do not use in areas with constant water exposure. For interior use only.
10.5 Oz
#9 Natural gray
Use around tubs and sinks
Use where horizontal and vertical surfaces meet
Siliconized for ease of use.
Suitable Tile Types:
Around tubs, showers and sinks
Bonds bath fixtures and loose tiles.
Composition of Product
Siliconized acrylic latex resins with fine fillers and colored pigments
.
Benefits
For caulking around sinks, tubs and showers
Adheres bath fixtures and loose tile
For joint up to ¼” (6mm) wide and deep
For interior use.
Instructions
Surfaces should be clean, dry and free of all contamination. Place cartridge in standard caulking gun. Cut tip off nozzle on a slant to desired opening size and completely fill joints with caulk. Smooth with wet finger. Clean off excess caulk with soap and water before it cures. Do not apply when temperature falls below 50°F (10°C).
WARNING: This product can expose you to chemicals including Crystalline Silica which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov